To Next PageTo Next Page
Need help?Do you have a question about the ZyXEL Communications XS1930 Series and is the answer not in the manual?
General| MAC Address Table | 16K |
|---|---|
| Series | XS1930 |
| Port Configuration | 8 x 10GBASE-T 2 x 10G SFP+ 8 x 10GBASE-T 2 x 10G SFP+ 4 x GbE PoE+ 12 x 10G SFP+ |
| Switching Capacity | 240 Gbps |
| Forwarding Rate | 178.6 Mpps |
| Power over Ethernet (PoE) | Yes |
| Layer | L2 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -40°C to 70°C |
| Management | Web GUI, CLI, SNMP |
| Ports | 10/12 |
Basic overview of the XS1930 series, its features, and management modes.
Explains the NebulaFlex management options, including standalone and cloud modes.
Lists various methods for managing the switch, such as Web Configurator, FTP, and SNMP.
Describes the two primary installation methods: desktop and rack-mounting.
Provides step-by-step instructions for placing the switch on a desktop.
Details the process of accessing the web configurator via IP address or ZON Utility.
Explains how to save configuration changes to non-volatile memory.
Guides through creating VLANs and assigning ports for network segmentation.
Explains how to set the switch's IP address for management purposes.
Provides details on firmware version, system status, and hardware monitoring.
Details configuring IP addresses, subnet masks, and gateways for network access.
Explains how to configure Power over Ethernet settings, including power budget and priority.
Guides on manually setting up VLANs and assigning ports for network segmentation.
Details configuring port-based VLANs where forwarding decisions are based on MAC address.
Details how to activate and configure different STP modes (RSTP, MSTP).
Provides settings for configuring Rapid Spanning Tree Protocol (RSTP) on the switch.
Guides on activating and configuring port authentication methods and RADIUS server settings.
Details the process of enabling and configuring IEEE 802.1x security for port authentication.
Details enabling port security and managing MAC address learning.
Guides on clearing the current switch configuration, excluding factory defaults.
Explains how to restart the switch and load specific configuration files.
Details the process of uploading and managing firmware images for the switch.
Guides on setting up SNMP versions, communities, and trap destinations.
Covers managing administrator and user accounts for web configurator access.
Explains how to use ping, traceroute, and port tests for troubleshooting.
Details how to check MAC address status (dynamic/static) and sort/filter entries.
Provides a summary of port statistics and links to detailed port information.
Displays detailed status and performance data for individual switch ports.
Addresses issues related to power, physical connections, and LED behavior.
Provides solutions for forgotten IP addresses, usernames, or login screen access issues.
