ZyXEL Communications XS1930 Series - CHAPTER 35 Maintenance

XS1930 Series User’s Guide
280
CHAPTER 35
Maintenance
35.1 Overview
This chapter explains how to configure the screens that let you maintain the firmware and configuration
files.
35.1.1 What You Can Do
• Use the Maintenance screen (Section 35.2 on page 280) to erase running configuration, save a
configuration file or restart the Switch.
• Use the Firmware Upgrade screen (Section 35.6 on page 284) to upload the latest firmware.
• Use the Restore Configuration screen (Section 35.7 on page 286) to upload a stored device
configuration file.
• Use the Backup Configuration screen (Section 35.8 on page 286) to save your configurations for later
use.
• Use the Erase Running-Configuration screen (Section 35.3 on page 282) to reset the configuration to
the Zyxel default configuration settings.
• Use the Save Configuration screen (Section 35.4 on page 282) to save the current configuration
settings to a specific configuration file on the Switch.
• Use the Reboot System screen (Section 35.5 on page 283) to restart the Switch without physically
turning the power off and load a specific configuration file.
• Use the Tech-Support screen (Section 35.9 on page 287) to create reports for customer support if
there are problems with the Switch.
• Use the Certificates screen (Section 35.10 on page 289) to import the Switch's CA-signed certificates.
35.2 The Maintenance Screen
Use this screen to manage firmware and your configuration files. Click Management > Maintenance in
the navigation panel to open the following screen.