Chapter 3 Hardware Panels
XS1930 Series User’s Guide
34
Figure 14 Removing the Fiber Optic Cables
Figure 15 Opening the Transceiver’s Latch Example
Figure 16 Transceiver Removal Example
3.2 Rear Panel
The following figures show the rear panels of the Switch.
Figure 17 Rear Panel: XS1930-10
Figure 18 Rear Panel: XS1930-12HP
3.2.1 Grounding
Grounding is a safety measure to have unused electricity return to the ground. It prevents damage to
the Switch, and protects you from electrocution.
Note: The Switch must be grounded by qualified service personnel.
1 Remove the M4 ground screw from the Switch’s rear panel.
To Next Page
Loading...
