Chapter 40 Cluster Management
XS1930 Series User’s Guide
321
• Use the Clustering Management Configuration screen (Section 40.1 on page 320) to configure
clustering management.
40.2 Cluster Management Status
Use this screen to view the role of the Switch within the cluster and to access a cluster member switch’s
web configurator.
Click Management > Cluster Management in the navigation panel to display the following screen.
Note: A cluster can only have one manager.
Figure 237 Management > Cluster Management: Status
The following table describes the labels in this screen.
Table 169 Management > Cluster Management: Status
LABEL DESCRIPTION
Status This field displays the role of this Switch within the cluster.
Manager
Member (you see this if you access this screen in the cluster member switch directly and not via
the cluster manager)
None (neither a manager nor a member of a cluster)
Manager This field displays the cluster manager switch’s hardware MAC address.
The Number of
Member
This field displays the number of switches that make up this cluster. The following fields describe
the cluster member switches.
Index You can manage cluster member switches via the cluster manager switch. Each number in the
Index column is a hyperlink leading to the cluster member switch’s web configurator (see Figure
239 on page 324).
MacAddr This is the cluster member switch’s hardware MAC address.
Name This is the cluster member switch’s System Name.
To Next Page
Loading...
