Chapter 5 Initial Setup Example
XS1920 Series User’s Guide
42
3 Click Basic Setting > IP Setup in the navigation
panel.
4 Configure the related fields in the IP Setup
screen.
5 For the VLAN2 network, enter 192.168.2.1 as the
IP address and 255.255.255.0 as the subnet
mask.
6 In the VID field, enter the ID of the VLAN group to
which you want this management IP address to
belong. This is the same as the VLAN ID you
configure in the Static VLAN screen.
7 Click Add to save your changes back to the run-
time memory. Settings in the run-time memory
are lost when the Switch’s power is turned off.
To Next Page
Loading...
