ZyXEL Communications ZyWall 110 - Set up the Policy Route (Zywall;Usg_Hq)

389/749
www.zyxel.com
CONFIGURATION > VPN > IPSec VPN > VPN Gateway > Show Advanced Settings
> Authentication > Peer ID Type
Set up the Policy Route (ZyWALL/USG_HQ)
Go to ZyWALL/USG_HQ CONFIGURATION > Network > Routing > Add. Set Source
Address to be the subnet (192.168.2.0/24 in this example) allows joining the VPN
tunnel. Set Destination Address to be the remote LAN subnet (192.168.10.0/24 in
this example).