8/8
Establish connection
Both ZyWALL USG’s are now configured. The only thing left, is to establish
the VPN connection. This can be done manually by selecting your VPN
connection and clicking the Connect button in Configuration VPN
IPSec VPN VPN Connection. Alternatively you can edit the VPN
Connection rule, click Show Advance Settings and enable Nailed-Up.
With Nailed-Up enabled the VPN tunnel will connect up automatically
when the ZyWALL USG boots up.
All devices at the Branch Office will now be able to access devices and
computers on the Headquarters subnet and vice versa.
To Previous Page
Loading...
