ES-2048 User’s Guide
Chapter 10 Filtering 103
CHAPTER 10
Filtering
This chapter discusses and MAC address port filtering.
10.1 Configure a Filtering Rule
Filtering means sifting traffic going through the switch based on the source and/or destination
MAC addresses and VLAN group (ID).
Click Advanced Application and Filtering in the navigation panel to display the screen as
shown next.
Figure 44 Filtering
The following table describes the related labels in this screen.
Table 21 FIltering
LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by deselecting this check box.
Name Type a descriptive name (up to 32 printable ASCII characters) for this rule. This is for
identification purpose only.
To Next Page
Loading...
