ZyXEL Communications ZyXEL Dimension ES-2048 - 22.3 DSCP-to-IEEE802.1 p Priority Mapping Settings

ES-2048 User’s Guide
164 Chapter 22 DiffServ Code Point
Figure 72 DiffServ Network Example
Switch A marks traffic flowing into the network based on the configured marking rules.
Intermediary network devices 1 and 2 allocate network resources (such as bandwidth) by
mapping the DSCP values and the associated policies.
22.2 Activating DiffServ
Activate DiffServ to allow the switch to enable DiffServ on the selected port(s).
Click IP Application, DiffServ in the navigation panel to display the screen as shown.