ES-2048 User’s Guide
Chapter 23 Maintenance 169
CHAPTER 23
Maintenance
This chapter explains how to configure the maintenance screens that let you maintain the
firmware and configuration files.
23.1 The Maintenance Screen
Click Management, Maintenance in the navigation panel to open the following screen.
Figure 75 Maintenance
The following table describes the labels in this screen.
Table 49 Maintenance
LABEL DESCRIPTION
Current This field displays which configuration (Configuration 1 or Configuration 2) is currently
operating on the switch.
Firmware
Upgrade
Click Click Here to go to the Firmware Upgrade screen.
Restore
Configuration
Click Click Here to go to the Restore Configuration screen.
Backup
Configuration
Click Click Here to go to the Backup Configuration screen.
Load Factory
Default
Click Click Here to reset the configuration to the factory default settings.
To Next Page
Loading...
