ZyXEL Communications ZyXEL Dimension ES-2048 - Chapter 34 Interface Commands; 34.1 Overview; 34.2 Interface Command Examples

ES-2048 User’s Guide
Chapter 33 Configuration Mode Commands 261
An example is shown next.
• Specify RADIUS server 1 with IP address 10.10.10.1, port 1890 and the string secretKey
as the password. See Section 33.9.1 on page 259 for more information on RADIUS server
commands.
• Specify the timeout period of 30 seconds that the switch will wait for a response from the
RADIUS server.
• Enable port authentication on ports 4 to 8.
• Activate reauthentication on the ports.
• Specify 1800 seconds as the interval for client reauthentication.
sysname(config)# radius-server host 1 10.10.10.1 acct-port 1890 key
-> secretKey
sysname(config)# radius-server timeout 30
sysname(config)# port-access-authenticator
sysname(config)# port-access-authenticator 4-8
sysname(config)# port-access-authenticator 4-8 reauthenticate
sysname(config)# port-access-authenticator 4-8 reauth-period 1800