Power Supply
Part Numbers 91378101
PoE+ injector
For intercom supply via the Ethernet cable where the PoE+
switch is absent.
932928Part No.
12 V transformer
For 230 V mains voltage.
For external power supply of the lock with 12 V AC voltage.
Two-Wire Connection
Part No. 9159014EU/US
/UK
2N 2Wire
®
(set of 2 adapters plus EU/US/UK power supply)
The converter allows you to use the existing two-2N 2Wire
®
wire cabling from your original door bell or door intercom and
connect any IP device to it. You do not have to configure
anything, all you need is one unit at each end of 2N 2Wire
®
the cable and a power supply connected to them.
To Next Page
Loading...
Need help?
General
