2N IP Style User Manual

2N TELEKOMUNIKACE a.s., www.2n.cz 66/105
HID SE (Seos, iClass SE, Mifare SE)
125 kHz, 13.56 MHz NFC Bluetooth & RFID Reader
A combined Bluetooth and 125 kHz and 13.56 MHz card reader module (Part No.
) is one of the 2N IP Verso system elements and is used for smartphone/9155082
®
2N
®
tablet/card access control, making user calls and/or other functions.Mobile Key
NFC – a licensed function, for Mobile Key for Android only.2N Mobile Key
®
The module contains two bus connectors.2N IP Style
®
These two connectors are fully interchangeable and can be used either as inputs
from the basic unit or outputs to other modules.
If this module is the last one on the bus, one of the connectors remains
unconnected.
The module package includes a 220 mm long interconnecting cable.
The following RFID cards can be read:
125 kHz
EM4xxx
13.56 MHz
ISO14443A (Mifare, DESFire)
PicoPass (HID iClass)
FeliCa
ST SR(IX)
2N Mobile Key
®
Tip
To accelerate access card reading, you are recommended to select the
card types used by the user in the module settings.

2N IP Style Specifications

General

Tamper Switch	Yes
Power Supply	12V DC
Ingress Protection	IP65
Inputs	2
Operating Voltage	12V DC
Speaker Impedance	8 Ohm