3-9
Figure 3-10 Address Table Aging Time Setup Page
Removing MAC Addresses for the specific port
The Port Remove Page allows the network manager to remove MAC Addresses for the specific port
from the Address Table.
Click Monitoring > Address Table > Port Remove. The Port Remove Page opens.
Figure 3-11 Port Remove Page
1) Select a port to remove MAC Addresses.
2) Select entries from the address table to be removed.
3) Click Remove.
Removing MAC Addresses from the Address Table
The Address Table Remove Page allows the network manager to remove current MAC addresses from
the Address Table.
Click Monitoring > Address Table > Remove. The Address Table Remove Page opens.
Figure 3-12 Address Table Remove Page
To Next Page
Loading...
