3Com 3CRWX120695A - Page 54

54 CHAPTER 3: CONFIGURING WIRELESS SERVICES
“Configure
RADIUS
Servers” on
page 61
Expand the WX switch icon
in the Organizer panel,
right-click AAA > Edit;
then click RADIUS
1 From RADIUS Server tab:
 Click New RADIUS server
 Name: enter server name
 IP Address: enter server IP address
 Key: enter key
 Authorization password: enter
password
 Click Next
2 From RADIUS Server Group tab:
 Click New RADIUS Server Group
 Name: enter a group name
 Click Choose Available: select a
server
 Click Finish; then click Finish again
3 Configure the AAA backend from a
RADIUS server (not in 3WXM):
 Setup each WX switch as a RADIUS
client.
 Define the 3Com vendor-specific
attributes (VSAs) in the RADIUS
server’s dictionary.
 Configure each user record with
authorization rules (username and
password).
 Configure each user with either the
Vlan-Name attribute (3Com VSA)
or the RADIUS
Tunnel-Private-Group-ID to assign
users to VLANs.
 Configure authentication rules
(802.1X, MAC, last-resort, or web
authentication).
Table 9 Creating a Service for Employee Access (continued)
Task Path Primary Parameters to Configure