Mounting the Switch on a Desktop 29
Figure 14 Installation completed 2
Mounting the
Switch on a
Desktop
In many cases, standard 19-inch racks are not available. Therefore, switches
are often placed on a desktop. To place your switch on a desktop, you
simply need to:
■ Make sure that the surface is clean, flat, and sturdy.
■ Makes sure that the environment is well ventilated and allow 10 cm
(3.9
in.) of space around the chassis for heat dissipation.
■ Do not place heavy objects on your switch.
■ When stacking, the vertical distance between two switches must be at
least 1.5 cm (0.59 in).
Connecting the
Power Cords and
the Ground Wire
Connecting the AC
Power Cord
AC power source socket (recommended)
Use a single-phase three-wire power socket with a neutral contact or a
general purpose PC power socket, making sure that the neutral point is
well connected to building ground. Verify that the power source of the
build is reliably grounded.
Screw 1: Fix the rear bracket to the mount angle. Screw 2 is mounted to the switch.
Screw 2
Screw 1
Rear mount angle
Rear bracket
Screw 2
Screw 1
Rear mount angle
Rear bracket
To Next Page
Loading...
