EasyManua.ls Logo

3Com 4500G - Bootrom Upgrade using TFTP; Bootrom Upgrade using FTP

3Com 4500G
92 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
76 CHAPTER 5: UPGRADING SOFTWARE
Bootrom Upgrade
using TFTP
To upgrade the bootrom firmware from the Boot menu using TFTP do the
following:
1 From the Boot menu, select option 6 to display the bootrom upgrade menu
as shown:
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):
2 Select option 1 to display the following:
Load File name:
Switch IP address:
Server IP address:
3 Enter the file name, switch IP address and Server IP address to display the
following:
Are you sure to update your bootrom? Yes or No(Y/N)
4 Enter y and the following information is displayed to indicate the file is
downloading:
Attached TCP/IP interface to netdrv0
Attaching network interface Io0...done
Loading.................................
...............done
Bootrom updating............done!
Bootrom Upgrade
using FTP
To upgrade the bootrom firmware from the Boot menu using FTP do the
following:
1 From the Boot menu, select option 6 to display the bootrom upgrade menu
as shown:
Bootrom update menu:
1. Set TFTP protocol parameter
2. Set FTP protocol parameter
3. Set XMODEM protocol parameter
0. Return to boot menu
Enter your choice(0-3):

Table of Contents

Related product manuals