16
C
HAPTER
1: S
WITCH
9100 O
VERVIEW
■
Controls traffic (including broadcasts)
■
Provides extra security
■
Protocol-sensitive filtering for VLANs
■
Responds to 802.3x flow-control messages
■
Autonegotiation to IEEE 802.3z for Gigabit Ethernet
■
Load sharing on multiple ports
■
Spanning Tree Protocol (STP)
(IEEE 802.1d) with multiple STP domains
■
Multiple spanning trees (64)
■
IGMP snooping to control IP multicast traffic
■
SuperStack II architecture
■
Integrated network management
■
19-inch rack or free-standing mounting
■
Agent support
■
Simple Network Management Protocol (SNMP)
■
Remote Monitoring (RMON)
groups 1 to 4 — statistics, history,
alarms, and events
■
Repeater and Bridge
Management Information Base (MIB)
■
Easy software upgrades
■
BOOTP for automatic
Internet Protocol (IP)
address configuration
■
Local management
■
Console command-line interface (CLI) connection
■
Telnet CLI connection
■
Web-based management interface
■
Traffic mirroring for all ports
Port Connections
The Switch 9100 has six autosensing 100/1000BASE-TX ports with
standard RJ-45 connectors, and supports two 1000BASE-SX ports using
standard MT-RJ connectors. You can connect other 100/1000BASE-TX
devices (such as 100 Mbps or 100/1000 Mbps switches or modules) to
the Switch 9100. You can also connect Switch 9100 devices to each
other.
To Next Page