3Com 9100 - Deleting Vlans

Deleting VLANs
79
■
Ports assigned
■
Tagged/untagged status for each port
■
How the ports were added to the VLAN (manually or by GVRP)
To display protocol information, use the following command:
show protocol {<protocol>}
This
show
command displays protocol information, including the
following:
■
Protocol name
■
List of protocol fields
■
VLANs that use the protocol
Deleting VLANs
To delete a VLAN, or to return VLAN settings to their defaults, use the
commands listed in Ta b l e 20
.
Table 20
VLAN Delete and Reset Commands
Command Description
disable ignore-stp vlan
<name>
Allows a VLAN to use STP port information.
unconfig vlan <name>
ipaddress
Resets the IP address of the VLAN.
delete vlan <name>
Removes a VLAN.
delete protocol <protocol>
Removes a protocol.