3Com Baseline 2816 User Manual

2
INSTALLING THE SWITCH
This chapter contains information that you need to
install and set up the Switch. It covers the following
topics:
■ Before You Begin
■ Positioning the Switch
■ Rack-Mounting or Free-Standing
■ Supplying Power to the Switch
■ Connecting a Network Device
■ Using SFP Transceivers
■ Performing Spot Checks
Before You Begin
WARNING: Safety Information. Before installing or
removing any components from the Switch or carrying
out any maintenance procedures, read the safety
information provided in Appendix C of this guide.
AVERTISSEMENT: Consignes de Sécurité. Avant
d'installer ou d'enlever tout composant du Switch ou
d'entamer une procédure de maintenance, lisez les
informations relatives à la sécurité qui se trouvent dans
l'Appendice B (Appendix C) de ce guide.
WARNHINWEIS: Sicherheitsinformationen. Bevor Sie
Komponenten aus dem Switch entfernen oder dem
Switch hinzufuegen oder Instandhaltungsarbeiten
verrichten, lesen Sie die Sicherheitsanweisungen, die in
Anhang B (Appendix C) in diesem Handbuch
aufgefuehrt sind.
ADVERTENCIA: Información de Seguridad. Antes de
instalar o extraer cualquier componente del product o
de realizar tareas de mantenimiento, debe leer la
información de seguridad facilitada en el Apéndice B
(Appendix C) de esta guía del usuario.
AVVERTENZA: Informazioni di Sicurezza. Prima di
installare o rimuovere qualsiasi componente dal product
o di eseguire qualsiasi procedura di manutenzione,
leggere le informazioni di sicurezza riportate
nell'Appendice B (Appendix C) della presente guida per
l'utente.
Positioning the Switch
The Switch is suitable for use in an office environment
where it can be free-standing or mounted in a standard
19-inch equipment rack.

3Com Baseline 2816 Specifications

General

Brand	3Com
Model	Baseline 2816
Category	Switch
Language	English