4
CONFIGURING THE SWITCH
This chapter provides information on how to configure
the Switch’s features. Topics include:
■ Configuration Overview
■ Viewing Switch Information
■ Changing the Admin Password
■ Modifying the IP Address Settings
■ Configuring Port Settings
■ Configuring VLANs
■ Configuring Link Aggregation
■ Viewing Statistics
■ Mirroring Port Traffic
■ Running Cable Diagnostic
■ Using the System Tools
■ Viewing Support Information
Configuration Overview
The Switch is shipped ready for use. If you only want
the Switch to function as a basic layer 2 switch, you do
not need to access the Web interface and configure the
Switch.
You only need to access the Web interface if you want
to:
■ Set the administration password to the Web
interface
■ Assign an IP address to the Switch
■ Configure the Switch’s advanced features
■ Upgrade the firmware
Viewing Switch Information
The Summary page, which automatically loads after you
log on to the Web interface, provides a snapshot of the
Switch’s basic settings and versions of current
components.
To Next Page
Loading...
