104 CHAPTER 6: CONFIGURING PORTS
Viewing Port Details The Port Detail Page displays the current port parameters for specific
ports.
Monitor users have no access to this page.
To view Port Details:
1 Click Port > Administration > Detail. The Port Detail Page opens:
Figure 46 Port Detail Page
The Port Detail Page contains the following fields:
■ Select a port — Selects a port to display its current settings.
■ Port State — Indicates the port state. The possible field values are:
■ Enable — Enables the port.
■ Disable — Disables the port.
■ Flow Control — Displays the flow control status on the port.
Operates when the port is in full duplex mode. The possible field
values are:
■ Enable — Enables flow control on the port.
■ Disable — Disables flow control on the port.
To Next Page
Loading...
