EasyManua.ls Logo

3Com OfficeConnect 3CDSG10PWR - Removing MAC Based Acls

3Com OfficeConnect 3CDSG10PWR
248 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Defining Access Control Lists 69
Removing MAC Based
ACLs
The MAC Based ACL Remove Page allows the user to remove MAC-based
ACLs or MAC-based ACL rules.
Monitor users have no access to this page.
Click Device > ACL > MAC Based ACL > Remove. The MAC Based ACL
Remove Page opens:
Figure 30 MAC Based ACL Remove Page
The MAC Based ACL Remove Page contains the following fields:
ACL Name — Selects a MAC-based ACL for removal.
Remove ACL — Enables the ACL to be removed.
Checkbox (unnamed) — When checked, selects the rule for removal.
The top checkbox is used to select all rules for removal.
Priority — Indicates the rule priority, which determines which rule is
matched to a packet on a firstmatch basis.
Source Address — Matches the source MAC address to which
packets are addressed to the rule.
Destination Address — Matches the destination MAC address to
which packets are addressed to the rule.
VLAN ID — Matches the packet's VLAN ID to the rule. The possible
field values are 1 to 4093.
CoS — Classifies Class of Service of the packet.

Table of Contents

Related product manuals