Configuring Address Tables 137
■ MAC Address — Displays the current MAC addresses listed in the
MAC address table.
■ VLAN ID — Displays the VLAN ID associated with the port and MAC
address.
■ State — Displays the current MAC address configuration method.
Possible values are:
■ Config Static — Indicates the MAC address is statically configured.
■ Port Index — Indicates the port through which the address was
learned.
■ Aging Time — Indicates the amount of time the MAC address
remains in the Dynamic Address table before it is timed out if no
traffic from the source is detected. The default value is 300 seconds.
2 Define the fields.
3 Click . The MAC address is added to the address table, and the
device is updated.
To Next Page
Loading...
