194 CHAPTER 15: MANAGING POWER OVER ETHERNET DEVICES
■ Selected Ports — Displays the PoE configuration for the selected
ports. The fields displayed are:
■ Port — Indicates the port number.
■ State — Indicates if the port is enabled to deliver power to
powered devices. The possible field values are Enabled or Disabled.
■ Mode — Indicates the port power mode. The possible field values
are Auto or Guarantee.
■ Power Max(watts) — Indicates the maximum amount of power
available to the interface. The field value is displayed in Watts.
■ Power Used(watts) — Indicates the actual amount of power
currently used by the interface. The field value is displayed in
Watts.
2 Define the fields.
3 Click . The settings are applied to the selected ports, and the
device is updated.
To Next Page
Loading...
