26 CHAPTER 1: GETTING STARTED
5 Enter Summary to view a summary of allocated IP addresses. The
following is an example of the display from the Summary command.
Select menu option# summary
IP Method: default
IP address: 169.254.99.51
Subnet mask: 255.255.0.0
Runtime version: 00_00_38 (date 01-Apr-2007 time 15:31:29)
Bootcode version: 1.0.0.12 (date 01-Apr-2007 time 17:44:52)
Select menu option#
The initial set up of your switch is now complete and the switch is ready
for you to set up your chosen management method. See
“Methods of
Managing a Switch” on page 19.
For more information about the CLI, refer to “3Com CLI Reference Guide”
on page 227.
If you do not intend to use the command line interface using the console
port to manage the switch, you can logout, disconnect the serial cable
and close the terminal emulator software.
To Next Page
Loading...
