95
■ Minutes — The minute of the hour at which DST ends. The field
range is 0-59.
■ Month — The month of the year in which DST ends. The field
range is 1-12.
■ Day — The day of the month at which DST ends. The field range is
1-31.
■ Year — The year in which DST ends. The field range is 2000-2037.
■ Recurring — Enables user-defined DST for countries in which DST is
constant from year to year, other than the USA and Europe.
■ From — Configures the recurring time and date on which DST begins
every year. The fields to set are:
■ Day — Selects the weekday on which DST begins every year.
■ Week — Selects the week of the month from which DST begins
every year.
■ Month — Selects the month of the year in which DST begins every
year.
■ Time — The time of day at which DST begins every year. The field
format is HH:MM, where HH is the 2-digit hour and MM is the
2-digit minute.
■ To — Configures the recurring time and date on which DST ends
every year. The fields to set are:
■ Day — Selects the weekday on which DST ends every year.
■ Week — Selects the week of the month at which DST ends every
year.
■ Month — Selects the month of the year in which DST ends every
year.
■ Time — The time of day at which DST ends every year. The field
format is HH:MM, where HH is the 2-digit hour and MM is the
2-digit minute.
2 Define the Local Settings time and date fields.
3 To configure the device to automatically switch to DST, select Daylight
Saving and select USA, European, or Other. If you select Other:
a To configure DST parameters that recur every year, select Recurring.
b Define the From and To fields.
4 Click . The time, date and DST settings are saved, and the device
is updated.
To Next Page
Loading...
