20
25. Select PRINT.
NOTE: If the color built into the test print does
not match a color of one of the installed print
cartridges, the printer will assign an installed
cartridge color to the test print. Select the
checkmark to continue.
26. Gently squeeze the bottle and apply a thin layer of Cube
Glue to the print pad. Select the checkmark to continue.
NOTE: Apply enough glue to cover a square area
of 5”/15 cm.
NOTE: Ensure the glue is dry prior to printing.
NOTE: For best results, apply a thin layer of glue
using slow, circular motions.
To Next Page
Loading...
