NA - ENG
April 2017
3M-Matic
™
Accuglide 3 - 3 Inch Taping Head
Page 1
=%%6S#0-!X D):""!+)4$"0'C)F!$-)B)D)0'%<, Type 10800
1'(!'-!-):,!
The intended use of the AccuGlide™ 3 Upper and Lower Taping Heads - 3 inch is to
apply a “C” clip of Scotch
®
pressure-sensitive lm box sealing tape to the top and/or
bottom center seam of regular slotted containers. These taping heads are incorporated
into most standard 3M-Matic™ case sealers. The compact size and simplicity of the
taping head also makes it suitable for mounting in box conveying systems other than
3M-Matic™ case sealers. This includes replacement of other types of taping, gluing or
stapling heads in existing case sealing machines. The AccuGlide™ 3 Upper and Lower
Taping Heads - 3 inch have been designed and tested for use with Scotch
®
pressure-
sensitive lm box sealing tape.
To Next Page
Loading...
