NA - ENG
March 2017
3M-Matic
™
7000a-7000a3 Pro
Page 17
H
L
W
Figure 5-1
Figure 5-2
Figure 5-3
Figure 5-4
H
L
W
5.1 Shipment and Handling of
Packed Machine
- The machine is xed on the
pallet with four (4) bolts and can
be lifted by using a fork truck.
- The package is suitable to travel
by land and by air.
- Optional sea freight package is
available.
Packaging Overall Dimensions
(Figure 5-1)
See Speci cations.
During the shipment it is possible
to stack a maximum of 2 machines
(Figure 5-2).
5.2 Packaging for Overseas Shipment
(Optional - Figure 5-3)
The machines shipped by sea freight
are covered by an aluminum/
polyester/polythene bag which
contains dehydrating salts.
5.3 Handling and Transportation of
Uncrated Machine
The uncrated machine should not be
moved except for short distances and
indoors ONLY. Without the supporting
pallet, the machine is exposed to
damage and may cause injuries.
To move the machine use belts or
ropes, paying attention to place them
in the points indicated using care to
not interfere with the lower taping
head (Figure 5-4).
5.4 Storage of the Packed or
Unpacked Machine
If the machine is not used for a
long period, please take the
following precautions:
- Store the machine in a dry and
clean place.
- If the machine is unpacked it is
necessary to protect it from dust.
- Do not stack anything over the
machine.
- It is possible to stack a maximum
of 2 machines
(if they are in their original packing).
5. Shipment-Handling-Storage-Transport
To Next Page
Loading...
