NA - ENG
March 2017
3M-Matic
™
7000a-7000a3 Pro
Page 41
7000a-7000a3 Pro Adjustable
Case Sealer, Type 11500
Frame Assemblies
To Order Parts:
1. Refer to rst illustration,
Frame Assemblies, for the
Figure Number that identi es
a speci c portion of the machine.
2. Refer to the appropriate Figure
or Figures to determine the
parts required and the parts
reference number.
3. The Parts List that follows
each illustration, includes the
Reference Number, Part Number
and Part Description for the parts
on that illustration.
Note – The complete description
has been included for standard
fasteners and some commercially
available components. This has
been done to allow obtaining
these standard parts locally,
if desired.
4. Order parts by Part Number,
Part Description and Quantity
required. Also include the
model/machine name, machine
type, and serial number that are
located on the identi cation plate.
5. Refer to the rst page of this
instruction manual “Replacement
Parts and Service Information”
for replacement parts ordering
information.
Important – Not all the parts listed
are normally stocked
items. Some parts or
assemblies shown are
available only on
special order.
Contact 3M/Tape
Dispenser Parts to
con rm item
availability
Options and Accessories
For additional information on the options and
accessories listed below - contact your
3M Representative.
Part Number Option / Accessory
78-8052-6553-1 Box Hold Down Attachment
70-0064-2998-2 Caster Kit Attachment
70-0067-5966-9 Conveyor Extension Attachment
70-0064-4963-4 AccuGlide™ 3 Upper Taping
Head - 2 inch, Type 10800
70-0064-4962-6 AccuGlide™ 3 Lower Taping
Head - 2 inch, Type 10800
70-0064-4965-9 AccuGlide™ 3 Upper Taping
Head - 3 inch, Type 10800
70-0064-4964-2 AccuGlide™ 3 Lower Taping
Head - 3 inch, Type 10800
78-8069-3926-6 Low Tape Sensor Kit
70-0064-1097-4 Tape Application Monitor (TAM)
78-8095-4854-4 2-Inch Tape Edge Fold
Attachment, Upper Head
78-8095-4855-1 2-Inch Tape Edge Fold
Attachment, Lower Head
70-0064-1104-8 Tape Application Monitor -
Tape Outboard Kit
78-8114-0940-4 3 Flap Folder Kit
70-0067-3769-9 Filler Plate - Lower
16. Technical Documentation and Information (continued)
To Next Page
Loading...
