3M 3M-Matic 7000r - Intended Use

1
AccuGlide 3 - 2" - NA
2013 April
Intended Use
The intended use of the AccuGlide™ 3 Upper and
Lower Taping Heads - 2 Inch is to apply a "C" clip of
Scotch
®
pressure-sensitive fi lm box sealing tape to
the top and/or bottom center seam of regular slotted
containers.
These taping heads are incorporated into most
standard 3M-Matic™ case sealers. The compact
size and simplicity of the taping head also makes
it suitable for mounting in box conveying systems
other than 3M-Matic™ case sealers. This includes
replacement of other types of taping, gluing or stapling
heads in existing case sealing machines. The
AccuGlide™ 3 Upper and Lower Taping Heads -
2 Inch have been designed and tested for use with
Scotch
®
pressure-sensitive fi lm box sealing tape.
AccuGlide™ 3 Upper Taping Head - 2 inch, Type 10800