3M 3M-Matic 7000r - 3 Safety; General Safety Information; Signal Words Explanation

5
3-SAFETY
2014 June
7000r-7000r3 Pro - NA
3.1 General Safety Information
Read all the instructions carefully before starting work
with the machine; please pay particular
attention to sections marked by the symbol:
The machine is provided with a LATCHING EMERGENCY
STOP BUTTON (Figure 3-1); when this button is pressed,
it stops the machine at any point in the working cycle.
Maintain clear access to power cord while machine is
operating. Disconnect plug from power source before
machine maintenance (Figure 3-1). Also disconnect air
if the machine has a pneumatic system. Keep this manual
in a handy place near the machine. This manual contains
information that will help you to maintain the machine in a
good and safe working condition.
3.2 Explanation of Signal Word and
Possible Consequences
Indicates a potentially hazardous
situation, which, if not avoided,
may result in minor or moderate
injury and/or property damage.
Caution:
Indicates a potentially hazardous
situation, which, if not avoided,
could result in death or serious
injury and/or property damage.
Warning:
Figure 3-1
E-Stop
"On-Off"
This safety alert symbol identifi es important
messages in this manual.
READ AND UNDERSTAND THEM
BEFORE INSTALLING OR
OPERATING THIS EQUIPMENT.