3M M1500SS - Page 25

3M™ MicroTouch™ Display M1500SS User Guide 23
3M Touch Systems, Inc. Proprietary Information
M1500SS Base Plate Mounting Template
(Drawn actual size)
3M Touch Systems Proprietary Information
Cut Line
Rear Edge of Base Not
Shown
Place this template on mounting surface and drill three holes as shown for mounting screws.
The screw heads must be smaller than 0.38" (10 mm) and larger than 0.21" (5.5 mm).
Adjust height of screw heads to securely lock monitor in place. This height is about 0.23" (6 mm).
0.39" (10 mm)
0.21" (5.5 mm)
Drill 3 Mounting Holes
Front Edge of Base