3M MP410 - Projector Control Panel Layout and Functions

14
English
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
Control Panel
# Name Description
1 Power Turns the projector on or off.
2 Keystone ad-
justment
Press to adjust image distortion caused by tilting the projector
(+/-40 degrees).
3 Auto adjust Press to synchronize the projector to the input source.
NOTE: Auto Adjust does not operate if the on-screen display (OSD) is
displayed.
4 Error LED Error LED is blinking amber, one of the fans has failed. The pro-
jector will automatically shut down.
5 Temp LED If the TEMP amber indicator is on or blinking, one of the following
problems could be occurring:
Internal temperature of the projector is too high.
6 Menu Press to activate the OSD. Use the directional keys and the Menu
button to navigate through the OSD.
7 Source Press to enter Source menu and select an input source.
8 Enter Press to conrm the selection item.
9 Four Direction-
al Select Keys
Press to navigate through the On-Screen Display (OSD) Menu
items.
1
2
3
4
5
6
2
7
8
9