25
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
English
Source
The Source menu allows you to select your projector's input source.
Auto
If you select and press to activate, the Auto option will automatically nd the next
available input source.
VGA
Press to detect a VGA signal.
DoUSB
Allows you to display the computer/laptop screen to your projector via the USB cable.
NOTE: When you connect the projector and computer via the USB cable, a USB Connected
message will pop up and allow you to select input sources as DoUSB or Storage.
The USB Connected Screen shown below appears:
Storage Mode: Allows you to execute copy, delete, move, and more instructions
from your computer (only supports microSD and internal memory).
HDMI
Press to detect a HDMI signal.
To Next Page
Loading...
