3M MP410 - Installing the Optional Remote Control Battery; Operating Range for Optional Remote Control

16
English
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
Installing the Remote Control Battery (Optional)
Remove the battery holder by holding down the side
release rmly and pulling out the battery holder.
1.
3
V
O
L
T
S
CR2025
3
V
O
L
T
S
CR2025
M
3
V
O
L
T
S
CR2025
NOTE: When you use the remote control for the rst time, there
is a plastic sheet between the battery and its contact. Remove
the sheet before use.
Insert a CR2025 coin cell battery and align the polarity
correctly according to the marking in the battery holder.
2.
Replace the battery holder.3.
Operating Range with Remote Control (Optional)
±20°
7 m/22.97 feet
NOTE: Actual operating range may slightly differ from the diagram. Additionally, a weak battery
reduces or eliminates the operating range of the remote control.