EasyManuals Logo

3M MP410 User Manual

3M MP410
51 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #5 background imageLoading...
Page #5 background image
4
English
© 3M 2012. All Rights Reserved.
3M™ Mobile Projector MP410
Warning
To reduce the risk associated with hazardous voltage:
Do not modify this product in any way. Use only 3M approved replacement com-
ponents.
Do not attempt to service this projector.
There are no user-serviceable parts. Service to be performed only by a 3M autho-
rized service provider using 3M approved system components.
Do not use the wall power supply in a wet environment.
Do not use with a damaged wall power supply. Replace damaged part prior to use.
To reduce the risk associated with re and explosion:
Do not immerse the projector in any liquid or allow either to get wet.
Use only 3M approved power supply.
To reduce the risks associated with choking:
Keep all small parts like the remote control battery away from young children and
pets.
To reduce the risk associated with hazardous voltage, impact, tripping, and
intense visible light:
Do not use this projector around unsupervised children.
Caution
To reduce the risks associated with hearing loss:
Be sure to read earphone manufacturer's instructions with respect to volume level.
User is responsible to set a safe volume level.
To reduce the risk associated with explosion, and/or chemicals from a leaking
batteries:
Use only with battery type CR2025.
Orient the battery's plus (+) and minus (-) terminals of the batteries according to
the markings found on the remote control.
Do not leave the battery in the remote for an extended period of time.
Do not heat or expose the battery to re.
Do not disassemble, short, or recharge battery
Do not carry batteries loose in your pocket or purse.
Avoid eye and skin contact in the event that battery leaks.
Do not recharge the battery near a heat source or in extremely hot conditions.

Table of Contents

Other manuals for 3M MP410

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the 3M MP410 and is the answer not in the manual?

3M MP410 Specifications

General IconGeneral
Projection distance- m
Projection technology-
Screen size compatibility17 - 100 \
Projector native resolutionWXGA (1280x800)
Aspect ratio16:9
RS-232 ports0
Connectivity technologyWired
Focal length range- mm
Light source typeLED
Service life of light source20000 h
RMS rated power1 W
Audio formats supportedMP1, MP2, MP3, WMA
Image formats supportedBMP, JPG
Video formats supportedAVI, DIVX, MKV, MOV, MP4, WMV
Number of built-in speakers1
Full HDNo
Supported graphics resolutions1280 x 800 (WXGA), 1920 x 1080 (HD 1080)
USB connector typeUSB Type-A
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Compatible memory cardsmicroSDHC
Maximum memory card size32 GB
Internal storage capacity1 GB
Noise level- dB
Product typeStandard throw projector
Product colorGrey, White
Market positioningPortable
Cable lock slot typeKensington
Power sourceDC
Power consumption (standby)- W
Cables includedAC, VGA
Weight and Dimensions IconWeight and Dimensions
Depth105 mm
Width106 mm
Height39 mm
Weight375 g

Related product manuals