3M PROTEGE PLUS - Page 7

3M™ PROTÉGÉ PLUS
PORTABLE MULTI-GAS MONITOR
OPERATION
8006569, Rev. C/June 2019 6-7
Press both left hand and right hand button simultaneously and immediately release the buttons to
display the menu function (Figure 6-2: Menu Display).
Figure 6-2: Menu Display
Refer to Figure 6-3: to Figure 6-9: for the configuration process of each menu function.
Figure 6-3: Monitor Configurable Menu
Table 6-5: Monitor Configuration Parameters
Item Description
Sensor Information
Check the sensor values, including High alarm, Low alarm,
Bump/Cal due days.
Gas Exposure Check the Peak values, TWA and STEL values.
Date Check the current date, time and year.
Temperature Check the current temperature.
Power Save Enable and disable the power save mode.
Firmware Version Check the current firmware version.
LEL
CO
PPM
H2S PPM O2
%
%