3M SCOTT AIR-PAK X3 PRO - Performing Operational Testing

SOFT GOODS ASSEMBLY & DISASSEMBLY
28 P/N 595360-01 Rev G 202004
9 Position the drag rescue loop so that its snaps line up with the center of the upper slot of the clevis. Carefully, pull
the loop through the slot, taking care not to damage the snaps. See Figure 2-8.
Figure 2-8 Pulling the drag rescue loop through the upper slot of the clevis
10 Pull the lower metal slide and webbing through the lower slot of the clevis to complete the removal of the
shoulder harness from the backframe. See Figure 2-9.
Figure 2-9 Pulling the lower metal slide through the lower slot of the clevis
TIP
Lifting the shoulder pads to align the upper and lower metal slides with the clevis slots helps them pass
through the slots more easily.
Pull the loop
through the
slot
Pull the metal
slide through
the slot