19
Operator’s Guide
3M
™
Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Remote Control Functions
Aim the remote control toward the projection screen or at the IR sensor on the front of the projector. Press
desired remote control button to send a signal to the projector.
Trigger button is
bottom of remote
ON/STANDBY ON: Press to turn projector ON.
OFF: Press to display confirmation message, press
again to switch projector to Standby mode.
Note: The confirmation message displays to ensure
unit does not get turned off accidentally.
INPUT/ SOURCE Press for current input source. Press again to select
different computer/video input.
[Computer 1/Componet 1 –> Computer 2/Componet 2
–> RCA Composite Video –> S-Video]
Volume +: Press to increase speaker volume.
Volume –: Press to decrease speaker volume.
Mute: Press to switch the audio sound ON or OFF.
Menu: Press to display the Main Menu. When a menu is
open, press to exit menu.
R/Click Performs remote Right Mouse click function (when
USB is connected to projector USB).
Up Arrow Moves cursor upward through menu items.
Down Arrow Moves cursor downward through menu items.
Left Arrow Moves cursor left through menu items. Moves .ppt
slides backwards.
Right Arrow Moves cursor to right through menu items. Moves .ppt
slides forward.
Mouse Pad Allows remote mouse functions. Allows Pan function
when in Zoom mode.
Blank: Press to replace projected image with black image.
Press again to return projection image.
Freeze: Press to freeze current image. Press again to return to
active image.
Timer: Press to initiate a 10:00 minute digital timer. Press
up/down arrows to change timer clock by 1 minute
intervals up to 99:00.
Zoom +: Press and hold to increase the size of the displayed
image up to 200 percent.
Zoom -: Press and hold to decrease size of the displayed image
down to 100 percent
Bottom Trigger Pull trigger for remote LEFT mouse button functions.
In menu mode, use for remote Enter / Select functions.
To Next Page
Loading...
Need help?
General
