3M SCP716 - Setup Menu

27
Operator’s Guide
3M
™
Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Setup Menu
The Setup Menu, shown below, is used to configure the basic projector operating parameters.
Setup Input Source: Computer 1
Language English X
Auto Shutoff Minutes Off |···········z···········|
Keystone 0 |···········z···········|
Reset Lamp Hrs X
Lamp Mode Normal X
Fan Mode Normal X
Projection Mode Front Projection X
Factory Reset All X
Advanced X
teseR X
Feature Description Range Default
Language Select the language for menu displays
[1-English, 2-French, 3-Spanish, 4-Deutsch, 5-Italian,
6-Japanese, 7-Mandarin Traditional, 8-Mandarin
Simplified, 9-Korean]
N/A English
Auto Shutoff
Set the number of idle minutes (no input source detected
and no commands issued) before the projector will
automatically shut off.
0–60 10
Keystone
Vertical keystone adjustment.
Stereo Mini 1 – VGA/Component
Stereo Mini 2 – VGA2/Component
RCA – S-Video/Component
-15–+15 0
Reset Lamp Hours
Reset lamp hour status indicator. 3EE)NFORMATION-ENU.
N/A N/A
Lamp Mode Bright, Normal, ECO N/A Normal
Fan Mode Normal, High N/A Normal
Projection Mode
1-Front Projection, 2-Rear Projection, 3-Front Ceiling,
4-Rear Ceiling
N/A
Front
Projection
Factory Reset Reset all menu items to FACTORY DEFAULT settings N/A N/A
Advanced Select the Advanced Setup Menu. N/A N/A
Reset Reset values in this menu only N/A N/A
27© 3M 2006. All Rights Reserved.
ENGLISH