3M SCP716 - Advanced Setup Menu

28
Operator’s Guide
3M
™
Super Close Projection System SCP716
© 3M 2009. All Rights Reserved.
ENGLISH
Advanced Setup Menu
The Advanced Setup Menu, shown below, is used to initiate the PIN code feature (turn On/Off) and set the
PIN code.
Setup PIN Input Source: Computer 1
PIN Authentication Off X
Network Control On X
Change PIN · X
Feature Description Range Default
PIN Authentication Turn the PIN code security feature On or Off. N/A Off
Set PIN code
Change the 4-digit PIN access code as desired.
.OTE7HEN0).SECURITYISENABLEDTHE0).ACCESS
CODEWILLAUTOMATICALLYSETTOTHEDEFAULTVALUE
0–9 3349
Network Control
Turns the network control function on and off. The
network control feature allows a computer to open
the control web page on I/O module and control the
projector.
To view the control web page, connect the I/O
module into the local area network and type the
I/O module's IP address into the address bar of a
web browser. (The IP address can be found in the
projector’s information menu. See the next page.)
The control web page will display. A RS-232 and
network control guide is available at www.mmm.
com\meetings in the Technical Documents section.
On/Off On
28
ENGLISH