Measure
Run, stop, and view results
Sound Examiner SE-400 Series
Run, stop, and view results
The run/stop key is used to run and stop integrating measurements, which is saved as a session. The
viewable measurement screens include the multi-measurement screen (which is the default screen) and the
single measurement screen. When the SE-400 Series is in stop mode, it will display the summary data until
the instrument is powered off or the run key is pressed.
1. To start a session, press the key. The Run icon will appear with a run-time clock indicating the
current duration of your session.
Figure 4-8: Main/multi- measurement screen in Run mode
2. To stop a session, press the key. The Stop icon will appear.
Note: the duration of the session is indicated by the run-time clock.
3. To view a single large measurement, press the key. To view different measurement parameters,
press the / arrow keys.
Figure 4-9: Single measurement screen in stop mode
To Next Page
Loading...
