Appendix A
Sound Examiner SE-400 Series
User Interface Characteristics
Stored logged data includes: L
. Use 3M
TM
Detection
Management Software (DMS) to interpret data files.
Stored session summary data includes: L
and user settings. Use 3M
TM
Detection Management Software (DMS) to
5, 15, 30, 60 seconds and 5, 15, 30, 60 minutes
English, Spanish, German, French, Italian, Portuguese, Simplified Chinese,
Korean, and Czech
12 Keypad Keys: Run/Stop, On/Off/Esc, Enter, Backlight, 4 arrowed keys (up,
down, right, left), 4 Softkeys
Transflective 128 x 128 pixel resolution with LED backlighting
Display update rate: 1 x second
Display resolution: 0.1 dB
Modes include: low intensity, high intensity and off (SE-400 Non-IS models).
Modes include: dim, bright, and off (SE-400 IS models).
Power/Electrical Characteristics
Lithium Polymer (2500 mAHr), rechargeable.
Run-Time: 18 hours minimum (excluding the backlight).
Lithium Polymer Pack/Nominal 3.7V/1500 mAH, rechargeable. (3M
manufactured, p/n: 073-709).
Run-Time: 8 hours minimum (excluding backlight).
3 years or 500 cycles (service replaceable)
USB cable is provided with instrument.
Battery charge time: 8 hours (approximately)for non-IS models
2MB;( 34 days at 1-minute logging)
High power USB port 500mA or external USB charger
• Class/Type 1 Precision BK4936 microphone
• Class/Type 2 General QE7052 microphone
Removable preamp directly accepts ½” (13.2 mm) microphone
Up to 15 meters (50 feet) of cable with negligible signal loss
3.5 mm stereo (tip-AC, center ring, ring-Gnd)
Conforms to USB 2.0, mini-USB connector