3M SE-401 - SE-400 Series Models and Accessories; SE-400 Series Models and Part Numbers; Accessories (Sold Separately)

Appendix A
Sound Examiner SE-400 Series
33
SE-400 Series models and part numbers
3M ID
Sound Examiner SE-400 Kit Description
70-0716-0794-2
3M
TM
Sound Examiner SE-402 non-IS Includes meter with Class/Type 2 Microphone, USB cable, external power cord with USB, windscreen, calibrator
adapter, carry case, and user manual.
70-0716-0795-9
3M
TM
Sound Examiner SE-401 non-IS, Includes meter with Class/Type 1 Microphone, Remote Option, USB cable, external power cord with USB,
windscreen, calibrator adapter, carry case, and user manual.
70-0716-2114-1
3M
TM
Sound Examiner SE-402-10 non-IS kit includes meter with Class/Type 2 Microphone, AC-300 Calibrator, USB cable, external power cord with USB,
windscreen, calibrator adapter, carry case, and user manual.
70-0716-2113-3
3M
TM
Sound Examiner SE-401 non-IS -AC3 kit includes meter with Class/Type 2 Microphone, 3M
TM
AcoustiCal AC-300 Calibrator, Class/Type 1
Microphone, Remote Option, USB cable, external power cord with USB, windscreen, calibrator adapter, carry case, and user manual.
70-0716-2216-4
3M™ Sound Examiner Kit SE-402-R non-IS with removable preamp kit includes meter with Class/Type 2 Microphone, 53-575 USB cable, meter, with
removable preamp, 53-321 USB power supply, 59-344 WS-7 windscreen , 56-990 calibrator adapter and 53-711 carrying case, and user manual.
70-0716-2217-2
3M™ Sound Examiner SE-402-R-10 non-IS kit with removable preamp and QC-10 calibrator kit includes meter with Class/Type 2 Microphone, with
removable preamp, AC-300 calibrator, USB cable, external power cord with USB, windscreen, calibrator adapter, carry case, and user manual.
70-0716-0796-7
3M
TM
Sound Examiner SE-402 Intrinsically Safe model, Includes meter with Class/Type 2 Microphone, USB cable, external power cord with USB,
windscreen, calibrator adapter, carry case, and user manual.
70-0716-0793-4
3M
TM
Sound Examiner SE-401 Intrinsically Safe model, Includes meter with Class/Type 1 Microphone, USB cable, external power cord with USB,
windscreen, calibrator adapter, carry case, and user manual.
Accessories (sold separately)
3M ID
Part Number
Description
70-0715-8115-4
056-990
Calibrator Adapter for 0.50” (or 1.3 cm) diameter microphone for QC-10/20 or AcoustiCal AC-300 adapter (one included)
70-0716-0829-6
3M
TM
AcoustiCal Calibrator for Class/Type 1 Microphones (114 dB at 250 Hz and 1000 Hz)
70-0715-7972-9
QC-10 Sound Calibrator for Class/Type 2 Microphones with single output (114 dB at 1000 Hz)
70-0715-8374-7
059-045
Tripod (approximately 46” or 117 cm)
70-0715-8212-9
059-899
Extension Cable ICM-2 Microphone Cable
(2 feet/61 cm)
70-0715-8208-7
059-733
Extension Cable ICM-10 Microphone Cable (10 feet/3 m)
70-0715-8209-5
059-734
Extension Cable ICM-50 Microphone Cable (50 feet/15.24 m)
70-0716-2099-4
053-321
External USB power cable with international AC plugs
70-0715-8175-8
053-575
USB cable (one included)
70-0715-8234-3
053-711
Carrying case (one included)
70-0715-8135-2
059-344 (WS-7)
Windscreen (one included)
70-0715-7994-3
N/A
(SPDP-Printer)
Thermal printer, type FTP628, rechargeable Li-ion battery (1850 mAh) with belt clip, AC adapter/charger, printer cable, and a roll of
thermal paper.
70-0716-2098-6
057-342
Fujitsu Cable for SoundPatrol SE-400 thermal portable printer
70-0716-2097-8
057-343
Cable open ended tinned wires for SoundPatrol SE-400 user printer
053-764
Assembly 3.5 mm patch cable
70-0715-8344-0
057-258
Thermal paper: Five roll pack for use with the SPDP-Printer
70-0716-0821-3
N/A
3M
TM
Detection Management Software (DMS) (one included)
70-0715-8290-5
056-317
QE7052 Free-field, Class/Type 2 Microphone, (standard), low cost ½” diameter (.52”)
70-0715-8300-2
059-523
BK4936 - Free-field, Class/Type 1 Microphone, (standard), ½” diameter (.52”)
34-8708-6285-0
N/A
3M
TM
Sound Examiner SE-400 Series User Manual (one included)