3M Versaflo TR-300 PAPR - Reinstall the Filter Cover in the TR-300 Unit

3M™ Versaflo™ Powered and Supplied Air Respiratory Systems
Installing and Removing: Filters, Prefilter, Spark
A t /P filt
A
rres
t
or
/P
re
filt
er
 Reinstall the filter cover in the TR-300 unit
 Hook the left side of the filter cover into the left side of the
TR-300 unit. Press down on the right side of the cover
until the latch fully engages
until the latch fully engages
.
 Ensure the HE filter label can be seen in the filter
cover view window
cover view window
.
37
© 3M 2011. All Rights Reserved. Rev 1