3M Versaflo TR-300 PAPR - Breathing Tube Installation and Cleaning

3M™ Versaflo™ Powered and Supplied Air Respiratory Systems
Installin
g
and Removin
g
the Breathin
g
Tube
ggg
 Insert the end of the breathing tube with
the bayonet fitting (two small prongs)
into the
p
arallel slots in the air outlet of
p
the motor/blower (1).
 Twist the breathing tube ¼ turn to the
right to lock it into place (2)
right to lock it into place (2)
.
 Reverse steps to remove.

Refer to the
User Instructions
for the
Refer to the
User Instructions
for the
relevant headgear for procedures to
connect the breathing tube to the
headgear
47
© 3M 2011. All Rights Reserved. Rev 1
headgear
.