www.3ware.com 13
Chapter 2. Installing
Your 3ware RAID
Controller
Tools You Need
You will need the following tools during installation:
An ESD grounding strap or mat
A Phillips screwdriver
Before You Start
3ware 9650SE RAID controllers can be installed in a standard
enclosure or in an enclosure with a backplane.
1 Be sure to read “Safety Information” on page 8 in Chapter 1.
2 If you have a Battery Backup Unit (BBU), install it on the
controller before proceeding. For details, see
“Chapter 3.
Installing the Battery Backup Unit”.
To Next Page
Loading...
