3xLogic VX-3M-F-AWD User Manual

VISIX S-Series Network Camera | USER MANUAL v6.0
10385 Westmoor Drive, Suite 210, Westminster, CO 80021 | www.3xlogic.com | (877) 3XLOGIC
84
Figure 6-42 Time Settings
Configuring Time Synchronization by NTP Server
Steps:
(1) Toggle the radio button to enable the NTP function.
(2) Configure the following settings:
 Server Address: IP address of NTP server.
 NTP Port: Port of NTP server.
 Interval: The time synchronization interval. It can be set from 1 to 10080 minutes.
Figure 6-43 Time Sync by NTP Server
 Click to make sure that the NTP server is connected.
NOTE: If the camera is connected to a public network, you should use an NTP server that features
time synchronization capability, such as the server at the National Time Center (IP Address:
210.72.145.44). If the camera resides in a customized network, NTP software can be used to establish
a NTP server for time synchronization.
Configuring Time Synchronization Manually
Steps:
(1) Toggle the Manual Time Sync radio button.
(2) Click to set the system time from the pop-up calendar.
(3) Click to save the settings.
NOTE: The user can also toggle the Sync with local time checkbox to synchronize the time of the
camera with the time of your computer.

3xLogic VX-3M-F-AWD Specifications

General

Brand	3xLogic
Model	VX-3M-F-AWD
Category	Security Camera
Language	English